Home / Shop / Durol Lettering Colour, Gold Ink, For Natural and Artificial Stones, 100ml
Description

Durol lettering color is a special color used for coloring writings on monuments, sculptures or gravestones. This lettering color is offered in many different colors. However, lettering colors such as Kölner Dura Letter or Kölner Rapid Stone Mason can also be used as a primer for gilding headstone inscriptions.

How is lettering color used for coloring inscriptions?
For renewing the color coat of an inscription, the Dura Letter lettering color from Kölner or the Durol lettering color are particularly suitable. Both solutions are ready to use, weather resistant and have an extremely high covering power. In addition, both inks are non-chalking and non-yellowing. If you decide to repaint the lettering color, you should wait for dry and mild weather conditions. This will facilitate the application and drying of the paint.

When re-painting the inscriptions, you should plan for two days with one hour of pure working time each. In addition to the Durol lettering ink, the following tools are needed for the renewal of the lettering ink: A bristle brush, brush, rags, a bucket full of water, a blade scraper and a cuttlebone. The procedure is as follows:

1- The preliminary work – cleaning the surface
The first step is to remove old paint residues and dirt on the surface. This is important to be able to ensure adhesion of the new paint. The easiest way to remove the old paint is with a brush in combination with water. If individual paint residues cannot be removed with the brush, however, this is not a big deal for further processing. The stone should then be allowed to dry sufficiently (at least 30 minutes) before the paint is applied.

2- Applying the Durol coloring paint
The writing color is applied to the stone and its inscriptions. For painting out, the paint is filled into the screw cap. About one and a half to two paint lids are needed for painting, as the paint is very productive. The easiest way to paint out the letters is to dab them with a bristle brush, so that they end up well covered by the paint. Be sure to paint out the corners as well. If you are painting a polished stone (such as granite), the paint may also get on the area next to the letters, as the smooth surface of the stone will allow it to be removed once it dries. For rough stones, be sure to apply the paint only to the inscriptions. After the paint is applied, the stone with its inscriptions is left to dry for 24 hours. The processing can be continued the next day.

3- Removal of the paint residues next to the inscription
The third and last step is to remove the paint residues on the surfaces next to the letters. For this purpose, the rag is now dipped in water and then placed over the stone and the painted side so that it is moistened. After 30 minutes, the cloth is removed and placed on the floor underneath the painted surface to collect the old paint residue. Now remove the paint residue very carefully with the help of the blade scraper. Be careful to apply the blade scraper flat and not to exert too much pressure on the stone in the process. You should work especially carefully on the edges of the letters so as not to break off any stone edges from the surface. After removing the excess paint, use the flat side of the cuttlebone to remove the remaining paint residue. A little more pressure can be applied here to ensure that all remnants of paint next to the inscriptions disappear. The remaining streaks on the surface can be removed in the final stroke with the rag and water.

4- How is lettering color used when gilding stones?
If inscriptions are to be gilded, real gold leaf can be used for this purpose, or a metallic gloss paint such as Gold Decor. In the case of the latter, no primer is needed with the Durol lettering color. Before starting with the gilding or the use of the metal gloss varnish, the surface should be cleaned sufficiently, as is also the case when coloring the inscriptions.

In the first step, when gilding with gold leaf, the Durol lettering color is applied as a primer on the stone surface to be gilded in two coats, each with a drying time of 15 minutes. Kölner Rapid is particularly suitable for this purpose. After drying, gilding can then be carried out for up to three days. The length of time depends on the ambient temperature and humidity. The Kölner Rapid can be applied with a brush or sprayed on with a low-pressure spray gun. In this case, the nozzle width should be set to 1 – 1.5 mm.

A similar paint is Kölner Dura Letter which is also for natural and artificial stones.

Shipping

Shipping within New Zealand:

  • Enjoy free shipping on orders of $200 or more.
  • All orders are processed daily and shipped via NZ Post with a Track and Trace number.
  • Urban: from $10. Rural: from $12.
  • Saturday Delivery: from $24 (parcel will be delivered on Saturday).
  • Large or heavy products incur an extra shipping fee, which is applied automatically at checkout.

Shipping to Australia:

  • We dispatch orders to Australia daily. If you place your order before 2pm AU time, you can expect to receive your order within 10 days.
  • Orders placed after 2pm are processed the following business day.
  • All are shipped via DHL, FedEx or NZ Post (whichever is cheaper) with a Track and Trace number.
  • Our online shipping cost is estimated to the best of our ability. However, if you believe it is too high, please let us know.

Worldwide Shipping:

  • Add all the products you want to buy to your cart and then go to checkout.
  • Enter your address to get the shipping cost for your country.
  • Paying by PayPal: we receive your funds instantly and process your order immediately.
  • Paying by Bank Transfer: Make your payment and email us a screenshot so that we can process your order soon.
  • All orders are packaged nicely and securely, and a shipment tracking number will be emailed to you.
  • We use DHL, FedEx or NZ Courier to ship your parcel.
  • You can expect to receive your order within 15 days.
Adhesive Chart

Choosing the right gilding size is crucial for successful application. For special gilding projects, refer to the guide on Choosing The Right Gilding Adhesive.

Use the chart below to determine the right gilding size for your project

Gilding SizeIndoorOutdoorGenuine leafImitation leafPorous surfaceNon-porous surfaceWater-basedOil-basedReady inYou have open time
AquaYESYESYESYES1h60h
CeramicYESYESYESYESYES30min1h
InstacollYESYESYESYESYESYES30min1h, 48h
LefrancYESYESYESYES1h24h
LefrancYESYESYESYESYESYESYES1h3h
MissionYESYESYESYES15min1h
MiniatumYESYESYESYES30min1h
OtariYESYESYESYESYESYESYES4h4-12h
PermacollYESYESYESYESYES1h1h, 48h
Rapid StoneYESYESYESYESYES30min1h
Powder SizeYESYESYESYES30min1h
SigncollYESYESYESYES30min4-12h

Recently Viewed

Scroll To Top
Home
Shop
0 Cart

Login

Shopping Cart

Close

Your cart is empty.

Start Shopping

Close

Ask about this product

    Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
    • Image
    • SKU
    • Price
    • Availability
    • Add to cart
    • Description
    • Weight
    Click outside to hide the comparison bar
    Compare