Instacoll Gilding Size HA, 48hr, For Gilding With Genuine Gold Leaf on Any Surface, Indoor/outdoor, High Gloss Finish
8 in stock
- Gilding size for gold leafs
- Interior and exterior
- All surfaces, High Gloss
- 48hrs open time
- Made in Germany
$59 – $238
Shipping: All orders are processed and dispatched daily, with a courier tracking number:
- NZ: Urban: within two days, Rural: within four days.
- Australia: within 7 days.
- Worldwide: within 15 days.
Payment: pay by PayPal credit/debit card, Afterpay, or by Direct Bank Transfer.
Instacoll System consists of 2 components: Component 1 is the Base and Component 2 is the Activator. Instacoll is a gilding size (adhesive) for all types of metal leafs. Be it indoor and outdoor gilding. The size is applied with a synthetic brush. After the size (base layer) has dried—which can last up to 1 hour—it is possible to gild for 1 hour without using the Activator. For a longer-lasting or later gilding if you are gilding a large object, the surface can be reactivated with the Instacoll Activator.
Instacoll HA has slightly better adherence and is especially developed for metal leaves that are thicker than the standard gold leaves. Gilding with Instacoll HA (48h) is the same as gilding with normal Instacoll (1h) with the exception of extended drying time. Instacoll Base HA must dry a minimum of 48h before it can be activated with the Instacoll Activator HA.
Instacoll colour variation
You can use any colour regardless of what you are gilding; however, the variation in colour provides a smaller finish effect:
- Instacoll Grey is specially developed for the processing of silver and palladium leaves.
- Instacoll Yellow size works with gold leafs to give that bright and shiny finish
- Instacoll Clear size has no effects on the finish.
- Instacoll Red is for achieving warm antique gilded work when gilding with gold and silver leaf.
Preparing the surface
1- The surface must be dry, free from dust and grease. Surfaces must be machined in such a way that they are also weather-resistant without gilding.
- Gilding Wood: For untreated wood, a suitable wood primer must be used first.
- Gilding stone or plaster: apply one coat of a diluted mix of 9 parts Instacoll Base to 1 part water. Allow about 40 minutes to dry, now apply a normal coat of Instacoll Base Size.
- Gilding Metal: This is a delicate gilding job. Before applying Instacoll, the surface must be well prepared to protect the metal leaf and to avoid corrosion. Use a suitable metal primer and apply two coats. If your metal is in outdoor, it is best to apply two coats of suitable high-gloss paint. Never apply Instacoll Base on powder coating use always a primer.
- Gilding glass: You can use Instacoll Base Size on glass, but this can only be done for interior.
2- Apply Instacoll size one or two layers to cover the surface well.
3- Let Instacoll dry completely (48h) if you are using Transfer Gold Leaf which is best when gilding without the gesso application, however, if you are using Loose Gold Leaf then you need to apply the gold leaf while the Instacoll is still wet.
4- Apply the Activator with a Gilder’s Brush For Size Application and let it dry (5-10 min).
5- Firmly press down the gold leaves and rub with cotton over the transfer paper or use Gilder’s Soft Wool Brush For Transfer Leaf Application to press down the gold leaf.
6- Peel off the transfer paper, gently press down the gold leaf with the Instacoll Tissue once more and brush off the redundant gold. Burnish the gold with the Instacoll Tissue carefully.
7- Gilding time is unlimited, so if you are gilding a large project, you can re-use the Activator to reactivate the Instacoll adhesive and carryon gilding, even months later.
8- The gilded product can immediately be exposed to not too extreme weather conditions.
Recommended reading:
High performance Interior and Exterior Gilding with Instacoll System.
How to gild with the Instacoll System Base Size and the Activator
Ask about this product
Fill in the form below and we will get back to you wothin 20 minutes.
Related products
-
Gilding Product, Gilding Size (Adhesive), Size For Ceramic Gilding, Size For Genuine Leaf, Kölner Gilding System, Kölner Ceramic
Kölner Ceramic KT5-HV Gel High Gloss Gilding Size For Gilding With Genuine Gold Leaf, 50ml
Gilding Product, Gilding Size (Adhesive), Size For Ceramic Gilding, Size For Genuine Leaf, Kölner Gilding System, Kölner CeramicKölner Ceramic KT5-HV Gel High Gloss Gilding Size For Gilding With Genuine Gold Leaf, 50ml
0 out of 5(0)- For both genuine and imitation leafs
- KT5-HV, 50ml
- 50ml gel for china and ceramics
- Water-based
- Made in Germany
SKU: KT-5HV-50ML$123 -
Gilding Product, Sealer / Varnish, Kölner Permacoll
Patina Aging For Gilded Surfaces, Brown, On Acrylic Base, 100 ml, For Old & Antique Looks
Gilding Product, Sealer / Varnish, Kölner PermacollPatina Aging For Gilded Surfaces, Brown, On Acrylic Base, 100 ml, For Old & Antique Looks
0 out of 5(0)- Patina protects from oxidation
- Use Patina on acrylic base only
- Size 100ml
- Made in Germany
SKU: Patina100ml$45 -
Gilding Product, Gilder's Clay, Kölner Gilding System, Traditional Water Gilding, Kölner Classic Poliment
Kolner Poliment Classic Gilders Clay For Gold & Silver Leafs, Wet Bole, White 1kg
Gilding Product, Gilder's Clay, Kölner Gilding System, Traditional Water Gilding, Kölner Classic PolimentKolner Poliment Classic Gilders Clay For Gold & Silver Leafs, Wet Bole, White 1kg
0 out of 5(0)- Kolner Classic Gilders Clay
- Weight: 1 Kg. Colour: White
- Very good gradation. Does not pearl
- Excellent covering power
- Made in Germany
SKU: CLASPOLI-WHT$165 -
Gilding Product, Gilding Size (Adhesive), Size For Genuine Leaf, Size For Stone Gilding, Kölner Gilding System, Rapid Stone Mason
Kölner Rapid Stone Mason Gilding Size For Headstone Gilding, 15mins, Clear, 100ml
Gilding Product, Gilding Size (Adhesive), Size For Genuine Leaf, Size For Stone Gilding, Kölner Gilding System, Rapid Stone MasonKölner Rapid Stone Mason Gilding Size For Headstone Gilding, 15mins, Clear, 100ml
0 out of 5(0)- Gilding size for Headstone gilding
- Colour: Clear
- Ready in 15 minutes and 8hrs open time
- Content: 100ml
- Made in Germany by Kölner
SKU: RAPID-CLR-100ML$55 -
Gilding Product, Gilder's Clay, Kölner Gilding System, Traditional Water Gilding
Gilders Clay (bole), ready to use, Red, For Both Genuine and Imitation Gold Leaf
Gilding Product, Gilder's Clay, Kölner Gilding System, Traditional Water GildingGilders Clay (bole), ready to use, Red, For Both Genuine and Imitation Gold Leaf
0 out of 5(0)- Red colour bole
- Professional Standard
- Ready to use
- Made in Italy
SKU: BOLERED$55 – $185