You can transform various objects into metallic bronze finishes with bronze paint. You can apply bronze paint to any object made of wood, metal, plaster, stone, concrete, cardboard, etc.
Decorgold is a high-quality paint for indoor and outdoor surfaces, such as railings, fencing, walls, canvas, picture frames, statues, indoor and outdoor ornaments, walls, furniture of all kinds, and decorative objects.
Mineral-extracted mica and mother of pearl are currently hot items and are misused in all kinds of paint products, soap, and cosmetics. Unfortunately, the extraction of the mineral mica is subject to child labour and poor working conditions.
High-quality Bronze paint
- Apply the paint directly to the substrate without primer or undercoat.
- About 10m² per liter
- Drying time: about 60 minutes
- DecorGold paint is a water-based metal effect lacquer
- The product is anti-corrosive
- Harmless to the environment
- Low-odor, impact-resistant, gloss-resistant
- Non-yellowing with excellent hiding power
Bronze paint for outdoor
A good bronze paint does not contain bronze powder. Bronze powder (copper) will oxidise outdoors. This DecorGold paint does not contain bronze powder but a combination of coated metal powder and mica pigment, which are very fine-coloured glass particles.
The artificially manufactured mica used in DecorGold is of the highest quality and manufactured in Germany. DecorGold is excellent for outdoor use and is available in several colours.
Bronze paint for metal
First, it is best to apply a layer of primer. DecorGold also contains anti-rust agents and has a preservative effect on metal; no topcoat as a substrate is required. Make sure there are no sharp edges because this is where oxidation will occur first. The DecorGold can also be applied directly to the metal.
Bronze paint for wood
First, seal the surface with an undercoat or lacquer. Then, apply the bronze paint. For indoor use, a layer of primer is sufficient.
Bronze paint on plaster
Plaster is highly absorbent and, therefore, great for applying bronze paint. The metal pigment particles remain on the paint layer’s surface, giving a lovely shimmer. Often, a good result is achieved after one coat. Use the Kölner brushes. These filament brushes are so soft and provide an excellent result.
Bronze paint on plastic
First, treat the plastic with a bonding primer. Then you can apply the bronze paint.
Bronze paint on polystyrene
Be careful with Polystyrene/tempex, also called styrofoam. Only water-based bronze paint products should be used on these surfaces. The DecorGold paint is perfect for this application and can be applied directly to the material without a primer. In most cases, two layers give the best result.
Bronze paint on the wall
First, smooth the wall to a perfect condition. Paint the wall with matte paint: For example, a light ocher for a gold finish, brown for a bronze finish, or oxide red for a Copper finish. Silver is the most challenging colour. Paint a middle-grey colour for a silver finish. Metallic paint always works differently from regular paint due to the pigments. The most beautiful paint for walls is DecorGold, available in seven colours.
Usually, you will paint a wall in long lines from top to bottom. With metallic paint, you will start to see these jobs. It is best to fill in all sides of the surface with the roller criss-cross. Because you do this criss-cross, an irregular pattern is created. You will see this in the result, but that is not disturbing. 100% painting of metallic paint without starting is impossible. This only works if the paint is sprayed by someone very skilled.
